LDAP - POSIX environment integration

The LDAP directory uses a hierarchical structure to store its objects and their attributes, this structure can be thought of as a N-dimesional object. In contrast to this, POSIX or UNIX environments use a flat UID and GID namespace of entities (users, groups, services, etc.) which can be thought of as a two-dimesional surface. There are different ways of representing a N-dimesional objects on two-dimesional surfaces, unfortunately this cannot be done without compromise.

LDAP-POSIX support in DebOps

The ldap__posix_enabled default variable controls if the LDAP-POSIX integration should be done on a given host. By default the integration will be enabled, based on the value of the ldap__enabled variable. This choice will also be recorded in the Ansible local facts as ansible_local.ldap.posix_enabled variable, which will preserve the current state of the integration on subsequent Ansible runs.

If the POSIX support is disabled by setting the ldap__posix_enabled variable to False, DebOps roles which manage services in the POSIX environment will not configure LDAP support automatically - the required LDAP accounts will not be created and the service configuration will not rely on LDAP directory. Other, higher level services will be integrated with the directory as usual.

POSIX attributes

This is a list of the LDAP object attributes that are significant in a POSIX environment, managed via the passwd database:

  • uid

  • uidNumber

  • gidNumber

  • gecos

  • homeDirectory

  • loginShell

And a similar list, for the group database:

  • gid 1

  • gidNumber

These attributes are defined by the posixAccount, posixGroup and posixGroupId LDAP object types. All of them are auxiliary 2, and can be added to any LDAP objects in the directory.

Group membership should be defined by creating a groupOfNames LDAP object with posixGroup and posixGroupId types and using the member attribute to specify the Distinguished Names of the group members.

User Private Groups can be defined by adding the posixAccount, posixGroup and posixGroupId to a LDAP object, for example inetOrgPerson. In this case the uid and gid attributes should define the same name. Check the The posixgroupid schema documentation for more details.

Reserved UID/GID ranges

LDAP directory is commonly used in large, distributed environments as a global account and group database. Because of the long operational lifetime of these environments, counting in dozens of years or more, and issues with modification of UID and GID values in large environments, good selection of the UID/GID ranges reserved for use in the LDAP directory is a priority.

The systemd project has an excellent rundown of the UIDs and GIDs used on typical Linux systems in their documentation. You can also read the Debian FAQ answer that describes the default UNIX accounts and groups present on a Debian system. As an example of production UID/GID range allocation, you can check the UID/GID allocation page in the documentation published by the University of Cambridge Computer Laboratory.

For convenience, here's a summary of the UID/GID ranges typically used on Linux hosts, copied from the systemd documentation page:



Defined By

Listed in


root user


/etc/passwd + nss-systemd


System users




tty group




System users




Regular users


/etc/passwd + LDAP/NIS/…


Human Users (homed)






Dynamic service users






nobody user


/etc/passwd + nss-systemd


16bit (uid_t) -1





Container UID ranges








32bit (uid_t) -1


The factors taken into account during the default UID/GID range selection for the debops.ldap role are:

  • Large number of UNIX accounts, both for normal users and applications, starting with 50 000+ entries, with UID/GID of a given account reserved for a lifetime. Yearly increase in the number of accounts being 1000-5000, for example in a typical university.

  • Support for unprivileged LXC containers, which use their own separate subUID/subGID ranges in the same namespace as the LXC host. This implies that the selected UID/GID range needs to be half of maximum size supported by the operatimg system, or less, to allow for unprivileged UID/GID mapping on the LXC host.

  • Support for User Private Groups defined in the LDAP directory, which allows easier collaboration between users. This means that each UNIX account requires its own private UNIX group, ideally with the same name as the account, and the same UID/GID number.

  • Avoid collisions with existing UID/GID ranges used on Linux systems for local UNIX accounts and groups, or those reserved by common applications like systemd. This implies that the UID/GID numbers <1100 should be off-limits for LDAP directory to not collide with common desktop PC installations. Ideally the 0-65535 UID/GID range should be avoided altogether to allow for a continuous UID/GID range which makes randomized allocation easier.

With these parameters in mind, the 1879048192…2147483647 UID/GID range, highlighted in the table above, seems to be the best candidate to contain a reserved LDAP UID/GID range.

Suggested LDAP UID/GID ranges

The debops.ldap role defines a set of Ansible local facts that specify the UID/GID range reserved for use in the LDAP directory. The range is somewhat arbitrary and users are free to change it or not conform to the selected UID/GID range in their environments, however the selected range affects other applications configured by DebOps roles, for example:

  • the range of subUIDs/subGIDs used for unprivileged containers

  • the minimum and maximum UID/GID from the LDAP directory included in the passwd and group databases

  • the range of UIDs/GIDs allocated randomly by account management applications that support this functionality

and so on. The Ansible roles that want to conform to the selected UID/GID ranges can access them via Ansible local facts:

To allow for consistent UID/GID allocation in User Private Groups, a separate UID/GID range at the start of the allocated namespace has been reserved to contain only groups. The UIDs/GIDs above this range should be used only for personal or service accounts with correspodning private groups of the same name and GID as the account. The group range is defined in Ansible local facts as well:

The selected LDAP UID/GID range (2000000000-2099999999) allows for 100 000 000 unique POSIX accounts. The range reserved for groups (2000000000-2001999999) supports 2 000 000 unique groups. Users can increase or decrease the group range inside of the maximum UID/GID range, but going beyond that comes with a risk of exceeding the maximum UID/GID supported by the operating system and Unforeseen Consequences. The UID/GID ranges can be divided further between different purposes, but that's beyond the scope of this role.

With the selected ranges, a set of subUIDs/subGIDs (210000000-420000000) is also possible, therefore this range should be safe to use inside of the LXC containers. Note however, that the UID/GID range above 2147483648 is considered risky due to issues in some of the kernel subsystems and userspace tools that don't work well with UIDs outside of the signed 32bit range. This puts an upper limit on the normal set of UID/GID numbers to 2047483647 if you want to stay away from that region.

This unfortunately limits the ability to completely separate containers using private subUID/subGID ranges for each of them, but since the UID/GID numbers inside of the containers will belong to the same "entity" be it a person or a service, the risk in the case of breach between LXC containers should be minimized.

Next available UID/GID tracking

An important part of the POSIX environment is ensuring that UID and GID values are unique across the entire infrastructure. This is problematic with an LDAP directory due to a lack of the "auto-increment" feature which would allow for easy creation of new accounts with unique uidNumber and gidNumber values. Another risk is the possibility of a collision when two or more entities in a distributed environment are trying to create a new account at the same time.

A solution to this is to track the next available uidNumber and gidNumber values inside of the directory itself, using special objcts defined by a separate schema and use an atomic LDAP delete+add operation to ensure that the next available UID or GID is reserved for our purposes. This solution was inspired by the UIDNumber Attribute Auto-Incrementing Method article.

Design overview

When initializing a LDAP directory, DebOps creates two LDAP objects to track the next available UID and GID separately:

  • cn=Next POSIX UID,ou=System,dc=example,dc=org

  • cn=Next POSIX GID,ou=System,dc=example,dc=org

The Next POSIX UID object is meant to track user accounts with their corresponding User Private Groups; it will be initialized by the debops.slapd Ansible role with the next available UID after the admin account is created. The Next POSIX UID object is similarly initialized by the same role after all required groups are created. Users can create additional sets of UID/GID tracking objects for various purposes using the uidNext or gidNext LDAP object classes.

The uidNumber and gidNumber values can be modified by the members of the cn=UNIX Administrators group. The unique overlay ensures that these values are not repeated anywhere in the LDAP directory, and when they are incremented the specified values will be available for use.

How to acquire a new UID/GID

The mechanism of acquiring a new UID or GID needs to be implemented in the client applications that manage user accounts. Here you can find an explanation of how to get a new UID; getting a new GID is the same, just involves a different LDAP object.

  1. Search for the next available uidNumber value by checking the contents of the cn=Next POSIX UID,ou=System,dc=example,dc=org LDAP entry. An example CLI command:

    ldapsearch -Z -LLL '(& (objectClass=uidNext) (cn=Next POSIX UID) )' uidNumber

    Store the uidNumber value you found in the application memory for now.

  2. Create a "delete + add" LDAP operation (not "replace", which is not atomic). The operation should tell the LDAP directory to remove the specific uidNumber value we found using the search query and add a new one, incremented by 1. An example LDIF with the operation:

    dn: cn=Next POSIX UID,ou=System,dc=example,dc=org
    changetype: modify
    delete: uidNumber
    uidNumber: 2002000001
    add: uidNumber
    uidNumber: 2002000002
  3. Execute the operation on the LDAP directory. If it fails, the existing value won't be changed, so the operation is safe to use. An example CLI command with the above file:

    ldapmodify -Z -f nextuid.ldif
  4. Check the operation status returned by the server. If the operation succeeded, you can use the UID value you got at the first step and be sure that it is unique and available. If the operation failed, it means that somebody else has got the UID you currently keep in memory and it is reserved. In that case go back to step 1, search for the current available UID and try again.

Collisions with local UNIX accounts/groups

The POSIX environments permit duplicate entries in the passwd and group databases, that is entries with the same user or group names, or duplicate UID/GID numbers. However, most of the time, only the first entry found in the database is returned. This might cause confusion and hard to debug issues in the environment, or even security breaches if not handled properly.

The various DebOps roles that automatically manage custom UNIX groups or accounts, for example debops.system_groups, will check if the LDAP support is enabled on a given host. If it's enabled, they will automatically prepend _ character to any custom UNIX accounts or UNIX groups created by them, which will affect the user or group names, home directory names, sudo rules, group membership, etc. The names of UNIX groups or accounts present by default on Debian or Ubuntu systems (adm, staff, or other such cases) that are managed by these Ansible roles will not be changed. For example, the local equivalent of the LDAP admins group will be changed to _admins. Local UNIX accounts of the administrators (user) will be renamed to _user, and so on.

These changes will not be performed on already configured hosts if the LDAP support is enabled later on, to not create duplicate entries in the local user and group databases. In these cases, administrators are advised to either apply the desired modifications by themselves, or rebuild the hosts with LDAP support enabled from scratch.

Other DebOps or Ansible roles can also implement similar modifications to UNIX user or group names of the applications they manage, but that's not strictly required. LDAP administrators and editors should take care that the user (uid) and group (gid) names don't clash with the UNIX user and group names of different applications installed locally, to not cause collisions.



The gid attribute is defined by the custom posixgroupid LDAP schema, included in the debops.slapd Ansible role.


The posixGroup class is changed from STRUCTURAL to AUXILIARY via the rfc2307bis LDAP schema, installed by the debops.slapd Ansible role.